Making you become the expert of locating electric-cable breakdown

The DL series electric-cable breakdown test equipment that is the most simple and visual examination equipment originated by our company, is the best suited for locating breakdown of low or middle voltage direct-buried cable. It's also extremely effective for testing breakdown of above 110kv-voltage-grade direct-buried electric-cable's pipe.

DLD-200 Electric-cable Breakdown Accurate Locator

Characteristics:

The locator adopts advanced cable breakdown locating technique ,two probe and two kinds of principle method. It's easy to learn, simple to operate. With the different test method in condition of not replacing signal transmitter, it greatly increase work efficiency and the accuracy of locating direct-buried cable breakdown is extremely exalted. First of the locating method: it adopts “pulse stride electric voltage principle”, which is originated in domestic by our company . The principle can fast fix the direction of cable breakdown in big scope, then narrow the scope gradually, finally attain the purpose of accurate locating breakdown. Locating method two: with advantage of high sensitivity, strong anti-interference ability and independent usage, the “voice measure principle” can be used as a complement of first way, resolving the miscarriage problem that usually appears in locating cable breakdown.

Technical Specification:

Breakdown Scope: Soil etc. environment > 60m

Cement, brick etc. road > 20m

Accurate Locating: I-shape probe < 0.5m

Voice measure probe < 0.2m

Weight: 0.8kg

Size: 160mm×140mm×80mm

Operating Temperature: -10

Power Source: 6 No.5 batteries

DLC-100 Electric-cable Breakdown Measuring-distance Finder

Characteristics:

Adopting the modern micro-electric technique designs, the finder has high intelligence degree, and it can test electric-cable breakdown, such as, break-line, low-resistance, high-resistance, flash, etc. it also can automatically judge whether the breakdown-point radiate electricity, automatically calculate breakdown's distance. The safety is well because it insulates from electricity with high-voltage circuit. The test accuracy is high, at measure distance smaller than 1km, the test accuracy is smaller than ±1m; at measure distance bigger than 1km, the test accuracy is smaller than 0.5%. Adopting Chinese menu technique, it is apt to use and control. It can save 20 test waveform, don't throw to lose the data after shutting down, act for the printer function. The usage of clock mark makes it easy to turn over to see a waveform file. It has big LCD, which can adjust the bright degree by pressing a key. The rechargeable nichel-hydrogen battery can be automatically recharged. The finder is a design that is lightweight and impact, easy to take. Having communication interface with computer, it can provide long-distance service.

Technical Specification:

Maximum Test Distance: 10km

Permeated With Electricity The Consecutive Work Time Is Over And Above 10 Hours.

Power Consume: 2w

Operating Temperature: -10

Size: 230×160×90mm

Weight: 2kg

Test Accuracy: Test distance smaller than 1km, the test error not bigger than ±1m

The distance bigger than 1km, the test error not bigger than 0.5%

The test blind-area: smaller than 10m

DLX-510 Electric-cable Test High-voltage Signal Transmitter

DLX-510 Electric-cable Test High-voltage Signal Transmitter is mainly used in the breakdown test of 6-35kv electric-cable's high-resistance and flash. It can produce 30kv direct current high-voltage, making the cable breakdown-point strike to wear and radiate electricity, matching with the electric-cable breakdown measuring-distance finder and locator measure distance and locate breakdown-point. This product provide two kinds of work method: single-time radiating electricity and cycle radiating electricity. The product adopts special structure and technology, making the rising-pressure, rectifying-current and radiating-electricity controlling as a integral whole. Its wiring is simple, operating is safe and convenient, size is small and the weight is light.

Characteristics:

Integral design. It radiates electricity once 4s to the cable, so it greatly reduce the time of locating the breakdown-point. The all new high-voltage technology design, simple operating, convenient wiring and safety insulation mode, guarantees operating personnel's safety.

Adopting electric technology design in the controlling circuit, the safety and dependability extremely increase.

Technical Specification:

Output Direct Current Voltage: 0-30kv consecutive adjustable

Output Voltage Pole: cathode

Outsider Capacitance Capacity: 2uf

Supply Power: voltage 220±10%

Maximum Charging Current: 35ma

Physical Volume: 1.2kva

Maximum Radiating Energy: 900J

Size: 500×510×300mm

Radiating Cycle: 4s

Weight: 30kg

DLX-50 Electric-cable Breakdown Test High-voltage Signal Transmitter

It's used in breakdown test of electric-cable's high-resistance and flash. It can produce high voltage, making the electric-cable breakdown-point strike to wear and radiate electricity, matching with various kinds of measuring-distance finder and locator. It's safe and effective.

Characteristics:

It has direct current high voltage output, cycle radiating electricity function, matching with the different test equipment usage. Its size is small, integration degree is high, wiring is simple operating is convenient. The integral special structure design makes the safe degree of controlling high. It can automatically radiate electricity to the cable, the safe function is superior.

Technical Specification:

Output Voltage: 5kv

Rated Capacitance Capacity: 4uf

Maximum Charging Current: 35ma

Radiating Cycle: 4s

Weight: 20kg

Size: 400×290×380mm

Power Supply: 220V±10%

DLL-300/400 Electric-cable Path Finder

The finder consists of DLL-300 electric-cable path test transmitter and DLL-400 electric-cable path test receiver. It's used in testing the direct-buried electric-cable's path. This product is an impact, flexible, operating convenient cable and pine finder.

Characteristics:

Portable segment structure design, size small, weight light, operating simple. The transmitter has output short circuit automatic-protect function. The receiver probe's length can be willfully adjusted.

Technical Specification:

DLL-300 electric-cable path test transmitter:

Output Frequency: 512hz

Output Power: 2w

Weight: 1kg

Size: 75×75×180mm

Power Supply: 220V±10%

DLL-400 electric-cable path test receiver:

Input Frequency: 512hz

Probe Error: ±5cm

Weight: 0.5kg

Size: 100×50×180mm